SP 95 Impact Ball

SP 95 Impact Ball is used for sound insulation testing in light weight structures where a standard (tapping machine) impact sound source would create too much impact force. It has been designed in accordance to ISO 10140-5 and ISO 16283-2 standards. The use of SP 95 Impact Ball is very easy – it is dropped vertically in a free fall from height of 100 cm to the surface of the floor. In practise SP 95 can be used to assess soft impacts related to human disturbance, such as children jumping.

SVAN 977C

The SVAN 977C is a Class 1 Sound and Vibration meter designed for occupational and environmental measurement applications.
The meter is a successor of SVAN 977A offering new 1/2” microphone MK255 providing designed for acoustical measurements in research and development and also for industrial use. lt is designed and very carefully constructed to ensure excellent long-time stability of the electroacoustical parameters.

The built-in Bluetooth® interface together with smart-phone applications like Building Acoustics App and SvanMobile, extends measurement capabilities with all the features offered by smartphones including text/voice comments, photo, video, GPS position etc.

The SVAN 977C kit consists of SVAN   977C Class 1 sound & vibration level meter with a detachable preamplifier SV 12L and high quality MK255 microphone. Each SVAN    977C has its factory calibration certificate and 36 months warranty card.

SV 973

SV 973 is a Class 2 sound level meter with a wide frequency range up to 10 kHz. The unique feature of the SV 973 is the microphone in MEMS technology with a lifetime warranty. The meter’s measurement range from 25 to 128 dB enables its use in industrial and environmental noise measurements.

For measurements of noise at work, the intelligent sound exposure meter function limits the frequency range to 10 kHz and shifts the dynamic measuring range of sound level meter to 141 dB Peak. The instrument is easily calibrated in the field using an acoustic calibrator as the calibration begins automatically when the microphone is inserted into the calibrator. The SV 973 can measure broad-band results with all the necessary weighting filters as well as 1/1 octave or 1/3 octave band filters. Audio events recording function works together with sound level meter mode. The data are stored on built-in 8 GB memory and can be easily downloaded to a PC using the Supervisor or SVANPC++ software.

 

SP 95

SP 95 Impact Ball is used for sound insulation testing in light weight structures where a standard (tapping machine) impact sound source would create too much impact force. It has been designed in accordance to ISO 10140-5 and ISO 16283-2 standards. The use of SP 95 Impact Ball is very easy – it is dropped vertically in a free fall from height of 100 cm to the surface of the floor. In practice SP 95 can be used to assess soft impacts related to human disturbance, such as children jumping.

SV 102+

SV 102+ Dual Channel Noise Dosimeter replaces our ground breaking SV 102. It has been designed for the accurate measurement of noise exposure to ISO 9612 and MIRE (microphone in real ear) measurements to ISO 11904-1.

This new instrument uses a class beating high resolution, full colour OLED screen making it even easier to read; even in full daylight. The small memory capability of its predecessor; the SV102, has been upgraded by adding a microSD card for an incredible amount of storage capability. The sampling rate has been increased from 24 kHz to 48 kHz which enables the measurement of sound in the full frequency band. Also new is an LED that indicates the status of the measurement and changes colour when the noise dose exceeds the limit set.

A unique feature of all SVANTEK dosimeters, including the SV102 +, is their ability to simultaneously analyse 1/1 octave and record audio events . The use of 1/1 octave analysis is the most accurate method for the correct selection of hearing protection to ISO 4869-2 while simultaneous audio recording allows the user to capture and eliminate false sounds affecting the result of exposure to noise.

Unlike classic single channel noise dosimeters, the two channel SV102 + gives the unique opportunity to assess the exposure on both sides of the head simultaneously. This is particularly important where a worker is exposed to noise coming from a dominant directional source where placing the microphone on only one side could understate the true level of noise exposure. Another use of dual channel technology is the simultaneous measurement of noise both outside and inside any hearing protection being used with the use of a SV25S MIRE microphone.

MIRE methodology requires 1/3 octave analysis, another feature uniquely available in the SV102 + . MIRE measurement involves measuring the sound in the ear and performing a one-third octave band analysis on it. Using the SV102 + in conjunction with a special microphone probe like the SV25S, placed at the entrance of the ear canal, makes this all possible . A typical application of MIRE measurement is noise exposure monitoring in telephone call centres where the sound comes from the headphones; an application not suited to classical dosimetry methods.

Calibration of the both the SV102 + and the MIRE microphone is done using a SV34 calibrator. The calibration factor is stored inside the instrument and in the TEDS memory of the SV102+ microphones. This cross checking solution helps to prevent incorrect calibration factors being used.

The SV102 + is a low power instrument and is powered using only two small AAA batteries. It is fully supported by our Supervisor software which is dedicated to Health and Safety applications.

SVAN 979

The SVAN 979 Class 1 Sound & Vibration Analyser is our flagship device. Your first impression will be the amazing OLED display which features excellent visibility in all light conditions. The instrument’s lightweight and durable aluminium housing not only gives a sense of a firm grip but also protects the valuable electronic device from damage and any influence from electromagnetic interference.
The SVAN 979 has a very large dynamic range of measurement – over 110dB. It’s high-quality GRAS 40AE microphone allows measurement in the frequency range starting as low as 3 Hz. The measurement path has been designed to allow the use of other microphones should you want to measure very low frequencies or very high levels of noise. The microphone preamplifier has also been reinforced with a collar to protect against mechanical damage. One amazing feature of the SVAN 979 is that if you disconnect the microphone preamplifier then you can use the instrument for vibration measurements – simply connect up a cable and a vibration sensor .
The SVAN 979 has an extensive range of hardware and firmware add-ons that includes built-in Bluetooth®, windscreen infrared detector, direct connections to GPS module, GPRS or Wireless LAN modem or the totally unique built-in vibration shock sensor that warns the user whenever the instrument itself is exposed to vibrations that may influence the noise measurements.
Two USB connectors allow for the simultaneous operation of USB pen-drives and communication with the computer.
Usage of this number of advanced features at the same time is possible as the instrument has two high-speed digital signal processors. For example, the SVAN 979 is capable of measuring 2 ms steps of time history, logged simultaneously to audio recording (with 48kHz sampling) and real-time frequency analysis. Only the SVAN 979 can meet such a challenge. All data is stored on a microSD card of any capacity (default is 8GB) .
It is also important to note that unlike other brands which recalculate FFT spectrum to octave bands, the SVAN 979 performs frequency analysis in real-time, whether in octaves, third octaves all the way up to 1/12 octaves.
Setting up such advanced measurements can be very complicated but not in the SVAN 979. The intuitive menu structure of this instrument has been designed to make the measurement experience a pleasure.

SVAN 977A

The SVAN 977A is a Class 1 Sound and Vibration meter designed for occupational and environmental measurement applications. The SVAN 977A is a successor of SVAN 977 offering bigger memory 8 GB and the Bluetooth® interface as a software option that can be enabled at any time. The meter provides broad-band results such as Leq, Max, Min and Peak with all standard weighting filters together with an incredible time-history logging feature with two adjustable logging steps.
One unique feature of the SVAN 977A is ultrasound measurement band up to 40 kHz. The ultrasound band is normally considered as the frequency range above 20 kHz. Ultrasound is used in a number of industrial processes such as cleaning, drilling or welding as well as hospitals for medical procedures.
The built-in Bluetooth® interface together with smart-phone application, SvanMobile, extends measurement capabilities with all the features offered by smartphones including text/voice comments, photo, video, GPS position etc.

With the option of time signal recording SVAN 977A can record the raw signal samples with defined frequency up to 48 kHz. Analysis of the raw signal is used whenever frequency analysis is not sufficient. Post-processing of high quality wave files (48 kHz, 24 bit) such as calculation of tonality is available in SvanPC++ program. Time signal is recorded in a wave format which means that it can be played back in the PC software and used for noise source recognition (audio recording).

The SVAN 977A kit consists of SVAN   977A Class 1 sound & vibration level meter with a detachable preamplifier SV 12L and high quality omni-directional SV  7052E microphone, compliant to IEC61094-4. The list of accessories includes: SA 143 carrying case, SA  22 windscreen, 8 GB microSD card, four AA batteries, USB cable, and CD with user manual. Each SVAN     977A has its factory calibration certificate and 36 months warranty card.

With an optional microphone and 1/3 octave or FFT analysis SVAN    977A provides analysis of the ultrasounds up to 40 kHz. The ultrasound band is normally considered as the frequency range above 20 kHz. Limits of permissible ultrasound levels are usually expressed in terms of Leq and Max values specified in 1/3 octave bands for 20 kHz, 25 kHz, 31.5 kHz and 40 kHz.

SVAN 971

SVAN 971 Class 1 Sound Level Meter is an extremely small instrument with options for 1/1 & 1/3 octave analysis. The instrument brings unprecedented state of the art technology to a SLM of this size.The user interface makes both configuration and measurement easier than ever before. For those who don’t have time to work with measurement settings, SVAN 971 offers extremely simple operational mode with Start/Stop. This innovation makes the SVAN 971 an ideal choice for many applications including industrial hygiene noise, short term environmental noise, acoustic consultants, technical engineers and general noise measurements. Another exceptional feature is built-in self-vibration monitoring providing information about level of vibration that influences the measurement results.

The SVAN 971 provides broadband results with all required weighting filters plus 1/1 octave & 1/3 octave band filters. It also offers an incredible time history logging (capability providing broad band results and spectra with adjustable double (long and short) logging steps). Triggered audio recording is also available whilst logging complete functionality.

The instrument can be easily calibrated in the field using an acoustic calibrator. Insertion of the microphone into a calibrator automatically activates the calibration process and the calibration history is automatically logged. Data is stored on a μSD card and can be easily downloaded to a PC using the provided SvanPC++ software over either USB or RS 232 interfaces. New PC software Supervisor will help SVAN 971 owners to organise data from number of measurements and create measurement reports in a quicker and more efficient way than ever before.

Contact Us

Our calibration lab is closing for Christmas on the 10th December!

Discuss your requirements