SV 81 General Purpose Accelerometer

SV 81 General Purpose Accelerometer 500 mV/g The epoxy sealed piezoelectric accelerometer model SV 81 is used in the petrochemical, machine tool, and paper industries for monitoring of slow speed agitators, cooling towers, etc. It incorporates a low-pass filter within the conditioning electronic. This filter attenuates the sensor mechanical resonance and the associated distortion and overload. Annular shear mode is less susceptible to transverse vibrations and better immune to electronic saturation at high frequencies. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range.

SV 80 General Purpose Accelerometer

SV 80 General Purpose Accelerometer 100 mV/g The SV 80 accelerometer is an ideal choice for walk-around vibrations measurement in the rugged environments of industrial machinery monitoring, such as pumps, motors or fans.
It uses the industry standard ®ICP 2-wire voltage transmission technique with a 4 mA standard constant current supply. Signal ground is isolated from the mounting surface to prevent ground loops. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range.

SV 80 General Purpose Accelerometer 100mV/g

SV 80 General Purpose Accelerometer 100 mV/g The SV 80 accelerometer is an ideal choice for walk-around vibrations measurement in the rugged environments of industrial machinery monitoring, such as pumps, motors or fans.
It uses the industry standard ®ICP 2-wire voltage transmission technique with a 4 mA standard constant current supply. Signal ground is isolated from the mounting surface to prevent ground loops. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range.

 

 

 

 

 

SV 85

The SV 85 is a ICP® based TRI-AXIAL ACCELEROMETER designed for general purpose vibration measurements with the SVAN 958A four-channel analyser. The HERMETIC SEALED tri-axial industrial piezoelectric accelerometer is suitable to monitor the vibration in harsh industrial environment. The signal ground is ISOLATED from the mounting surface and outer case to prevent ground loops

SV151

SV 151 triaxial accelerometer has very high shock resistance, no DC offset effect, very low power consumption and a frequency response down to DC level. For the SEAT transmissibility measurements the small size SV 151 is placed on the vehicle floor in accordance to ISO 2631-1. The sensor’s built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to SV 106 instrument.

 

SV 150 H

SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor’s TEDS memory stores information about calibration factor limiting the risk of configuration errors. The accelerometer is supplied with three different diameter fixing clamps to conveniently match the grip of the vibrating tool being measured. SV 150 offers more robust and lower cost alternative to a traditional piezo-electric accelerometer.

 

SV 38V

SV 38V Seat Accelerometer is a triaxial Whole-Body seat accelerometer based on MEMS transducers dedicated to SV 106 instrument for Human Vibration measurements according to ISO 2631-1 requirements both on a seat pad or seat back. The SV 38V uses low voltage and consumes much less energy than IEPE accelerometers extending battery life time of SV 106 instrument. The built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to the SV 106 vibration analyser helping to avoid configuration errors.  A full ISO 8041 in-situ calibration check for before and after measurement is possible using the SV 111 portable vibration calibrator.

SV 80

SV 80 General Purpose Accelerometer 100 mV/g The SV 80 accelerometer is an ideal choice for walk-around vibrations measurement in the rugged environments of industrial machinery monitoring, such as pumps, motors or fans.
It uses the industry standard ®ICP 2-wire voltage transmission technique with a 4 mA standard constant current supply. Signal ground is isolated from the mounting surface to prevent ground loops. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range.

SV 81

SV 81 General Purpose Accelerometer 500 mV/g The epoxy sealed piezoelectric accelerometer model SV 81 is used in the petrochemical, machine tool, and paper industries for monitoring of slow speed agitators, cooling towers, etc. It incorporates a low-pass filter within the conditioning electronic. This filter attenuates the sensor mechanical resonance and the associated distortion and overload. Annular shear mode is less susceptible to transverse vibrations and better immune to electronic saturation at high frequencies. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range.

SV 84 B

SV 84 Building / Ground Vibration Accelerometer is a hermeticaly sealed triaxial piezoelectric accelerometer designed to monitor the vibration in harsh industrial environment. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range. The glass seal hermetic connector protects the piezoelectric disc and the electronic from harmful environmental influences, significantly increasing their reliability and lifetime.

SV 84 is offered separately or as a part of the SV 207B kit that includes metal mounting base (shown on a photo).

Contact Us

Our calibration lab is closing for Christmas on the 10th December!

Discuss your requirements