SVAN 977C

The SVAN 977C is a Class 1 Sound and Vibration meter designed for occupational and environmental measurement applications.
The meter is a successor of SVAN 977A offering new 1/2” microphone MK255 providing designed for acoustical measurements in research and development and also for industrial use. lt is designed and very carefully constructed to ensure excellent long-time stability of the electroacoustical parameters.

The built-in Bluetooth® interface together with smart-phone applications like Building Acoustics App and SvanMobile, extends measurement capabilities with all the features offered by smartphones including text/voice comments, photo, video, GPS position etc.

The SVAN 977C kit consists of SVAN   977C Class 1 sound & vibration level meter with a detachable preamplifier SV 12L and high quality MK255 microphone. Each SVAN    977C has its factory calibration certificate and 36 months warranty card.

SV151

SV 151 triaxial accelerometer has very high shock resistance, no DC offset effect, very low power consumption and a frequency response down to DC level. For the SEAT transmissibility measurements the small size SV 151 is placed on the vehicle floor in accordance to ISO 2631-1. The sensor’s built-in TEDS memory stores information about the accelerometer sensitivity that is automatically transferred to SV 106 instrument.

 

SV 84 B

SV 84 Building / Ground Vibration Accelerometer is a hermeticaly sealed triaxial piezoelectric accelerometer designed to monitor the vibration in harsh industrial environment. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Annular shear mode design prevents from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design gives the accurate result over the complete temperature range. The glass seal hermetic connector protects the piezoelectric disc and the electronic from harmful environmental influences, significantly increasing their reliability and lifetime.

SV 84 is offered separately or as a part of the SV 207B kit that includes metal mounting base (shown on a photo).

SV 38

The SV 38 is a MEMS based triaxial accelerometer designed for whole-body seat vibration measurements with the SVAN 958A four-channel analyser. The seat-pad meets ISO 8041:2005 and ISO 2631-1 requirements so it can be used for seat and seat-back vibration measurements.

For the periodic verification, the accelerometer can be easily removed from the seat pad and installed on a shaker with a dedicated SA 38 adaptor (optional).

SV 107B

SV 107B is a triaxial hand-arm vibration accelerometer dedicated to measurements according to ISO 5349-2 with SV 103 hand-arm vibration dosimeter. The SV 107B has in-built force sensors to detect the contact and to exclude periods of time when the tool is not in use.

For in-situ checks and periodic verification of the SV 107B the SA 105B adaptor (option) is necessary. The accelerometer has TEDS memory that remembers the calibration factor transferred to SV 103 instrument.

Accelerometer is supplied with three adaptors to perfectly match the grip of different vibrating tools. Each adaptor includes an adjustable rubber strap for firm and comfortable attaching the accelerometer to the human’s hand. This solution significantly limits disturbances to the operator who doesn’t have to worry about holding the accelerometer.

SV 105BF

SV 105BF Triaxial Hand-Arm Accelerometer is is dedicated to Human Vibration measurements performed according to ISO 5349-2 with SV 106 six channel analyser. The SV 105BF also features a force sensors to detect the contact and to exclude periods of time when the tool is not in use.
For in-situ checks and periodic verification of the SV 105BF the SA 105B adaptor (option) is necessary. The accelerometer has TEDS memory that remembers the calibration factor transferred to SV 106A instrument.
Accelerometer is supplied with three adaptors to perfectly match the grip of different vibrating tools. Each adaptor includes an adjustable rubber strap for firm and comfortable attaching the accelerometer to the human’s hand. This solution significantly limits disturbances to the operator who doesn’t have to worry about holding the accelerometer.

SV 105B

SV 105B Triaxial Hand-Arm Accelerometer is is dedicated to Human Vibration measurements performed according to ISO 5349-2 with SV 106A six channel analyser.
For in-situ checks and periodic verification of the SV 105B the SA 105B adaptor (option) is necessary. The accelerometer has TEDS memory that remembers the calibration factor transferred to SV 106A instrument.

Accelerometer is supplied with three adaptors to perfectly match the grip of different vibrating tools: SA 150B, SA 151B and SA 152B. Each adaptor includes an adjustable rubber strap for firm and comfortable attaching the accelerometer to the human’s hand. This solution significantly limits disturbances to the operator who doesn’t have to worry about holding the accelerometer.

SV 106A

SV 106A Six-channel Human Vibration Meter and Analyser meets requirements of ISO 8041:2005 standard and it is an ideal choice for measurements according to ISO 2631-1,2&5, ISO 5349 and directive 2002/44/EC of European Parliament. This revolutionary, pocket-size instrument enables simultaneous measurements with two triaxial accelerometers (e.g. both-hands vibration or triaxial SEAT transmission measurements are possible).
The RMS, Peak, Peak-Peak, VDV, MTVV or dose results such as A(8) and AEQ with all required weighting filters for human vibration measurements, including band-limiting filters, are available with this instrument. Using computational power of its digital signal processor, the SV 106A can perform 1/1 or 1/3 octave real-time analysis simultaneously to the meter mode.Advanced time-history logging and time-domain signal recording (according to the ISO 2631-5) to the microSD flash card offer a great data input for detailed signal analysis. Results can be easily downloaded to PC using USB interface. The instrument works with Svantek’s specialist health and safety software package, “Supervisor”, and also with the full analysis package SVAN PC++.
The whole-body vibration measurement is easier thanks to SV 38V seat-accelerometer which can be placed directly on the seat cushion, floor or fixed to the back of the seat.  The SV 105B set with triaxial accelerometer enables hand-arm vibration measurements regardless of the type of evaluated tool.

SV 100A

The new SV100A is a wireless whole-body vibration exposure meter suitable for whole-body measurements in accordance with ISO 2631-1. Suitable for taking measurements both on the seat and seat-back, the device uses the very latest technology and is easy to use. The instrument is equipped with 4 push buttons and a small OLED display that allows basic configuration in the field.
The wireless BT communication interface enables current results to be previewed on a smartphone or tablet using our Assistant Android application.
The smartphone app can also signal an alarm when set vibration limits are exceeded. Our advanced technology enables the automatic detection of an operator in the workplace. By default the instrument is configured for seat measurements (in a horizontal direction) but this setting can be easily changed.
When changing the orientation of the SV 100A to the vertical, the directions of axes and weighting filters are automatically adjusted in accordance to ISO 2631-1.
The device is equipped with both RMS and RMQ detectors which allows the calculation of Daily Vibration Exposure A(8) based on RMS and VDV simultaneously. All measurement results are stored in a large 8GB internal memory which allows continuous recording over long periods. The standard 2.0 USB interface allows fast data download and is also used for battery recharging.
For advanced users, the SV 100A offers frequency analysis in 1/1 or 1/3 octaves and time signal recording to wave format in accordance to ISO 2631-5 that is compatible with popular recalculation software.
The SV 100A is fully configurable with our Supervisor software. It can quickly and easily be setup for all the weighting filters required by ISO standards for the estimation of the effects of vibration on health, comfort, perception and motion sickness. The dedicated Whole-Body Vibration Exposure panel within Supervisor software makes reporting extremely easy.

SVAN 974

SVAN 974 Vibration Level Meter and Analyser is intended for general vibration measurements and machinery condition monitoring. It can be used by consultants, maintenance services, industry R&D departments etc.

Instrument allows parallel acceleration, velocity and displacement measurements. Three vibration profiles allow parallel measurements with independently defined filters and RMS detector time constants. Each profile provides a significant number of results (like RMS, Peak or Max).

The advanced time-history logging for each profile provides the complete information about the measured signal. Measurements data stored to microSD card can be easily downloaded to any PC using the USB interface and SvanPC++ software.

Most of required weighting filters, like VelMF, meeting ISO 10816 standard requirements, are available with this instrument. Using the computational power of its digital signal processor, the SVAN 974 instrument can perform additionally the real-time 1/1 or 1/3 octave or FFT analysis. The SVAN 974 offers also, parallel to the vibration measurement, the RPM measurement with Monarch laser tachometer.

Instrument is powered from four AA standard or rechargeable batteries. The powering of the instrument from the USB interface is also provided. The robust and very compact case together with a light-weight design complete the exceptional features of this modern instrument.

Contact Us

Our calibration lab is closing for Christmas on the 10th December!

Discuss your requirements