SV 200 Noise Monitoring Station is a fully integrated solution for unattended noise monitoring applications featuring an internal web server for system configuration, live data streaming, data management and battery powered operation providing true flexibility for both short and long term measurements.
The measurement capabilities of the SV200 are optimized for noise monitoring applications. It measures and stores results suitable for automatic reports,detailed information for advanced post-processing analysis and streams live data stream for real time noise monitoring. Standard measurement functionality includes multi-profile data logging, real time 1/1 and 1/3-octave logging, audio event recording and statistical analysis. Measuring capabilities can be extended with real time audio streaming and weather condition monitoring. SV 200 can be used for both and 0° and 90° reference direction, typically used for aircraft and environmental noise. The reference direction is user selectable in the instrument configuration.
The weatherproof housing protects SV 200 noise monitoring station against extreme weather conditions while fulfilling class 1 accuracy. Special attention was given to the highly efficient windscreen which reduces noise, even at high wind speeds. Internal heating and rugged a dual layer housing enables the SV 200 to operate from -30°C up to +60°C and humidity up to 100% RH.
SV 200 has a 2,45 Ah internal Li-Ion battery and interface for connecting solar panels. A waterproof mains adapter for charging the battery and powering the station is also included. The system is specially designed for easy installation – SV 200 is small, light weight and easy to install by a single person.
The SV 200 is available with an integrated low power 3G modem or Wi-Fi access point. The implementation of advanced and highly reliable communication protocol gives the user full control of the station, offers easy to use data transmission, real time data publication and live audio streaming. Station configuration and data management is done by using a web browser or the SvanPC++ RC server application.
|Standards||Class 1: IEC 61672-1:2002 (MKEH approval TH-8818/2/2017), Class 1: IEC 61260:2002|
|Number of Profiles||3|
|Weighting Filters||A, C, Z|
|Time constants||Slow, Fast, Impulse|
|RMS Detector||Digital True RMS detector with Peak detection, resolution 0.1 dB|
|Microphone||Microtech Gefell MK 255, 50 mV/Pa, prepolarised 1/2” condenser microphone|
|Linear Operating Range||25 dBA RMS ÷ 133 dBA Peak (in accordance to IEC 61672)|
|Total Dynamic Measurement Range||15 dBA RMS ÷ 133 dBA Peak (typical from noise floor to the maximum level)|
|Internal Noise Level||less than 15 dBA RMS|
|Dynamic Range||>115 dB|
|Frequency Range||3.5 Hz ÷ 20 kHz with GRAS 40AE microphone|
|Meter Mode Results||SPL, Leq, SEL, Lden, Ltm3, Ltm5, LMax, LMin, LPeak
Simultaneous measurement in three profiles with independent filters and detectors
|Statistics||Ln (L1-L99), complete histogram in meter mode
Ln (L1-L99) statistics in 1/1 or 1/3 octaves (if option is active)
|Data Logger||logging of summary results with step from 1 s (auto-save function)
logging of time history with step from 2 ms
|Audio Recording (option)||Audio events recording during measurement, trigger or continuous mode, 12 / 24 / 48 kHz sampling rate, 16 or 24 bit, wav format|
|1/1 Octave Analysis (included)||Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 31,5 Hz to 16 kHz|
|1/3 Octave Analysis (inlcuded)||Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 20 Hz to 20 kHz|
|Ingress Protection Rating||IP 65|
|Inputs||Power supply LEMO 3-pin, extended I/O port LEMO 9-pin|
|Remote Calibration||Built-in electrostatic actuator, triggered manually or in automated mode|
|Display & Keyboard||External 1.1” OLED colour display (option)|
|Communication Interfaces||USB / Serial port (RS 232 with optional cable)|
|3G modem (included in SV 200_3G)|
|Wi-Fi / LAN module (included in SV 200_WiFi)|
|External trigger input 0-30 V with pull-up 47 kOhm at 3.3 V|
|Power supply||Li-Ion rechargeable battery (non-removable)|
|Solar Panel (not included)|
|AC power supply (included) – Input 100-240 VAC, output +24 VDC 2.5 A, IP66 housing|
|External DC source (not included) – voltage range 10.5 V – 24 V, e.g. 12 V or 24 V accumulator|
|Environmental Conditions||Temperature from -30 oC* to 50 oC
*Only with external powering otherwise -10oC to 50 oC
|Humidity up to 99% RH, non-condensed|
|Dimensions||840 mm length; 70 mm diameter excluding windscreen; windscreen diameter 130 mm|
|Weight||Approx. 2.8 kg with batteries|
*Continuous product development and innovation are the policy of our company. Therefore, we reserve the right to change the specifications without prior notice.